linksys phone adapter PAP2 T
internet phone adapter.
Supports FSK Caller ID, DTMF Caller ID and FSK VMWI
Supports Session Ini

Linksys voip phone adapter PAP2T

Linksys PAP2T-NA Analog Telephone Adapter
Ports: Two FXS, One Ethernet
Protocols: SIP
Status: Unlocked

Linksys PAP2T-NA Product Description

The Linksys PAP2T-NA Internet Phone Adapter enables high-quality feature-rich VoIP (Voice over IP) service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. With the Linksys PAP2T-NA you'll get clear reception and reliable fax connections, even while using the Internet at the same time.

The PAP2T-NA enables feature-rich telephone service over your broadband Internet connection

The PAP2T-NA has two standard telephone ports for analog phones or use one of the ports for a fax machine, each with an independent phone number

The PAP2T-NA provides high quality, clear sounding voice service simultaneous with Internet use

The PAP2T-NA is compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc.

With Internet telephony, along with low domestic and international phone rates, an impressive array of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Linksys Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, and much more.

Linksys PAP2T-NA Features
  Two voice ports (RJ-11) for analog phones or Fax machines

Impedance Agnostics - 8 Configurable Settings

Call Waiting, Cancel Call Waiting, Call Waiting Caller ID

Caller ID with Name/Number (Multi-national Variants)

Caller ID Blocking

Call Forwarding: No answer, Busy, All

Do Not Disturb

Call Transfer

Three-way Conference Calling with Local Mixing

Message Waiting Indication - Visual and Tone Based

Call Return

Call Back on Busy

Call Blocking with Toll Restriction

Delayed Disconnect

Distinctive Ringing - Calling and Called Number

Off-hook Warning Tone

Selective/Anonymous Call Rejection

Hot line and Warm Line Calling

Speed Dialing of 8 Numbers/Addresses

Music on Hold

Linksys PAP2T-NA Package Contents

PAP2T Phone Adapter Unit

Power Adapter

RJ-45 Ethernet Cable

Quick Installation Guide

Data Networking

MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
SNTP - Simple Network Time Protocol (RFC 2030)

Voice Gateway

SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT (incl. STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
Codec Name Assignment

Voice Algorithms

G.711 (A-law and ??-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload
Adjustable Audio Frames per Packet

Fax Capability

Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP Dialing
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Attenuation / Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - via FSK
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions

Security

Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Up to 256-bit AES Encryption

Provisioning, Administration & Maintenance:

Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable

Physical Interfaces:

1 10/100baseT RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)

Subscriber Line Interface Circuit (SLIC):

Ring Voltage: 40-55 VRMS Configurable *
Ring Frequency: 10 Hz - 40 Hz *
Ring Waveform: Trapezoidal and Sinusoidal *
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -50 V NOMINAL
Off-hook current: 25 mA min
Terminating Impedance: 8 Configurable Settings including
North America 600 ohms, European CTR21

Regulatory Compliance:

FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick

Power Supply:

DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Switching Type (100-240v) Automatic
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord

Indicator Lights/LED:

Phone1, Phone2, Internet, Power

Documentation:

Quick-Start Installation and Configuration Guide
User Guide
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only

Dimensions: 3.98 x 3.98 x 1.10 (101mm x 101mm x 28mm) W x H x D
Operating Temp.: 32 to 113F (0 to 45C)
Storage Temp.: -77 to 158F (-25 to 70C)
Operating Humidity: 10 to 90% Non-condensing
Storage Humidity: 10 to 90% Non-condensing